No products in the cart.
€730.00 (incl VAT@23%)
The Multiboost Slimline range brought to you by WaterPartsDirect can fit through a standard doorway. This makes it very convenient for new or existing properties as it can be easily fitted under a stairs, or in a utility room. The slimline range is ideal for 3 – 5 bedroom houses, with poor water pressure and flow and where floor space is limited.
Key Features:
1. Non-corrosive holding tank (WRAS approved material)
2. Protective lid enclosure as standard
3. Minimal installation requirement
4. Adjustable LED digital display flow controller
5. Dry run protection with auto restart (time delay)
6. Start-up pressure 2.5 bar (adjustable)
Email to a friend
Description
This Multiboost Slimline water pressure boosting system is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Slimline range is designed for areas where floor space is restricted. The Slimline profile means the system can easily fit through a door, ideal for installation in existing buildings. This range caters for a wider variation of tank options.
Key Features:
1. Non-corrosive holding tank (WRAS approved material)
2. Protective lid enclosure as standard
3. Minimal installation requirement
4. Adjustable LED digital display flow controller
5. Dry run protection with auto restart (time delay)
6. Start-up pressure 2.5 bar (adjustable)
7. Efficient, cost effective and environmentally friendly
8. Robust and reliable
With a water pressure boosting system you can increase the water pressure in the entire system and all appliances connected to it: Showers, taps, toilets, washing machines, sprinklers, hosepipes, etc.
Overall, water boosting systems are suitable for:
Increasing the water pressure delivered by the mains supply.
Increasing the water pressure from tanks: Roof tanks, break tanks, ground tanks and rainwater tanks.
Lifting water from underground tanks and shallow wells until 8 m deep to the water table.
Low or fluctuating water pressure and unreliable, poor water flow rates can be a result one or more of many factors;
At peak usage times (morning and evening) higher demand is placed on mains lines.
Being near the end of a mains line.
Being at an increased elevation (eg. on a hillside or on an upper floor) means gravity can’t provide pressure naturally
Leaks in mains pipes prevent your water supply from performing efficiently
At times of reduced rainfall mains water supply may be reduced to a trickle
Using more than one water outlet in your home at once.
Additional information
| Weight | 26 kg |
|---|
Delivery:Delivery is calculated at the checkout when the destination has been entered.We currently ship to Ireland, Northern Ireland and the UK, for other destinations please send us an email to discuss delivery.Returns: How to return an item:Put your unused item for return back in its original packaging.Send an email to info@waterpartsdirect.com and clearly state whether you are returning or exchanging your purchase and the reason why.Send the item back to the address below.We will be in touch if there are any issues or when your return has been processed.Water Parts Direct,
Rathnure Lower,
Enniscorthy,
Co. Wexford,
Y21DX88Mobile: +353 872592580
Email: info@waterpartsdirect.comReturns PolicyAt WaterPartsDirect we pride ourselves with the high-quality of the products we supply our customers and we always go out of our way to make sure that we provide you with only the best, regardless of your business or industry. We do of course understand that not every product is made equal and that sometimes there are cases where the product itself is not fit for purpose or simply do not suit for the reason that it was bought for.
It is for this reason we are happy to accept items returned to us with 28 days of purchase and in this case we offer you an exchange or a full refund to your credit or debit card once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of WaterPartsDirect and may be refunded as a credit against a future purchase. All items must be returned to WaterPartsDirect in the same condition in which they were shipped and in a saleable condition. WaterPartsDirect reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.
Product brand
Related Products
WellMate¨ composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free.
€956.00 (incl VAT@23%) Add to cart
The Multiboost Slimline range brought to you by WaterPartsDirect can fit through a standard doorway. This makes it very convenient for new or existing properties as it can be easily fitted under a stairs, or in a utility room. The slimline range is ideal for 3 - 5 bedroom houses, with poor water pressure and flow and where floor space is limited.
Key Features:
¥ Non-corrosive holding tank (WRAS approved material)
¥ Protective lid enclosure as standard
¥ Minimal installation requirement
¥ Adjustable LED digital display flow controller
¥ Dry run protection with auto restart (time delay)
¥ Start-up pressure 2.5 bar (adjustable)
€780.00 (incl VAT@23%) Add to cart
WellMate¨ composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free.
€397.00 (incl VAT@23%) Add to cart
The Multiboost Utility range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where floor space is not restricted. This range caters for a wider variation of tank options. Key Features: 1 Non-corrosive holding tank (WRAS approved material)
2 Minimal installation requirement
3 Adjustable LED digital display flow controller
4 Dry run protection with auto restart (time delay)
5 Start-up pressure 2.5 bar (adjustable)
€1,800.00 (incl VAT@23%) Add to cart
WellMate¨ composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free.
€189.00 (incl VAT@23%) Add to cart
Global Water Solutions PressureWaveª tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation
systems, and hydraulic hammer arresting.
€245.00 (incl VAT@23%) Add to cart
Zilmet pressure tank's ULTRA PRO is suitable for any modern installation. Can be applied to any type of irrigation pump, centrifugal pump and booster sets.
€1,085.00 (incl VAT@23%) Add to cart
The Multiboost Utility range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where floor space is not restricted. This range caters for a wider variation of tank options. Key Features:1. Non-corrosive holding tank (WRAS approved material)
2. Protective lid enclosure as standard
3. Minimal installation requirement
4. Adjustable LED digital display flow controller
5. Dry run protection with auto restart (time delay)
6. Start-up pressure 2.5 bar (adjustable)
€800.00 (incl VAT@23%) Add to cart
WellMate¨ composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free.
€353.00 (incl VAT@23%) Add to cart
The Multiboost Utility range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where floor space is not restricted. This range caters for a wider variation of tank options. Key Features: 1. Non-corrosive holding tank (WRAS approved material)
2. Protective lid enclosure as standard
3. Minimal installation requirement
4. Adjustable LED digital display flow controller
5. Dry run protection with auto restart (time delay)
6. Start-up pressure 2.5 bar (adjustable)
€1,590.00 (incl VAT@23%) Add to cart
The Multiboost Rectangular range is designed for houses and apartments where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when the tap is opened and closed. The Rectangular range is designed for areas where height restrictions are an issue. Key Features: 1 Non-corrosive holding tank (WRAS approved material)
2 Minimal installation requirement
3 Adjustable LED digital display flow controller
4 Dry run protection with auto restart (time delay)
5 Start-up pressure 2.5 bar (adjustable)
€780.00 (incl VAT@23%) Add to cart
The Multiboost Utility range is designed for domestic and light commercial use where there is low mains water pressure and where pressure fluctuates. It is electronically controlled through a flow switch unit which starts and stops the pump automatically when a tap is opened and closed. The Utility range is designed for areas where floor space is not restricted. This range caters for a wider variation of tank options. Key Features: 1 Non-corrosive holding tank (WRAS approved material)
2 Minimal installation requirement
3 Adjustable LED digital display flow controller
4 Dry run protection with auto restart (time delay)
5 Start-up pressure 2.5 bar (adjustable)
€1,200.00 (incl VAT@23%) Add to cart
Zilmet pressure tank's ULTRA PRO is suitable for any modern installation. Can be applied to any type of irrigation pump, centrifugal pump and booster sets.
€335.00 (incl VAT@23%) Add to cart
WellMate¨ composite tanks are the tank of choice in residential and commercial applications for their unmatched durability. Their fiberglass construction makes the tanks impervious to rust. In addition, their epoxy-resin sealed outer shell will not dent and the scratch-resistant paint eliminates touch-ups, making WellMate tanks virtually maintenance-free.
€208.00 (incl VAT@23%) Add to cartFeatures & Benefits
- Replaceable air cell assures easier field servicing.
- Greater drawdown than comparably sized steel tanks yields greater efficiency.
- Extended labor warranty option is available to homeowners.
- Won’t rust in corrosive environments, particularly important in coastal regions.
- Quicker and less costly to install, usually requiring only one person and fewer man-hours.
- Wider pressure setting differential provides greater flexibility.
Global Water Solutions PressureWaveª tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems, and hydraulic hammer arresting.
€157.00 (incl VAT@23%) Add to cart