No products in the cart.
Out
of stock
Product Description
€700.00 (incl VAT@23%)
Lowara Genyo Pressure Boosting Pump Set 3HM04 4-Bar Lowara e-HM Horizontal Multistage Centrifugal Pump With Genyo Pump Control System.
The e-HM Series is a modern, robust designed pump offering: State-of-the-art hydraulics with best-in class efficiency paired with IE3 motors mean the lowest possible operating costs. Thick sheet metal casing, high-quality bearings & stainless steel guarantees a long service life. High-efficiency hydraulics, motor & thick sheet metal pump body keep noise levels to a minimum.
Genyo, the new range of compact electronic devices, pressure/flow switches for control and protection of electric pumps. It is controlled by an electronic circuit and is composed of a diaphragm and counteracting spring system integrated with flow and pressure sensors. Genyo enables automatic control of pump start-up and shutdown based on actual water demand, preventing any pressure fluctuations at delivery points with constant operating point. Genyo integrates multiple system controls into a single device.
Protection against dry running integrated in the device.
No maintenance required.
Quick easy installation.
Compact size.
Stable pressure without fluctuations at constant operating point.
Back-up tank compensates for small leaks or drips in the hydraulic system.
Limited flow resistance.
Out of stock
Email to a friendDescription
Lowara Genyo Pressure Boosting Pump Set 3HM04 4-Bar Lowara e-HM Horizontal Multistage Centrifugal Pump With Genyo Pump Control System.
The e-HM Series is a modern, robust designed pump offering: State-of-the-art hydraulics with best-in class efficiency paired with IE3 motors mean the lowest possible operating costs. Thick sheet metal casing, high-quality bearings & stainless steel guarantees a long service life. High-efficiency hydraulics, motor & thick sheet metal pump body keep noise levels to a minimum.
Genyo, the new range of compact electronic devices, pressure/flow switches for control and protection of electric pumps. It is controlled by an electronic circuit and is composed of a diaphragm and counteracting spring system integrated with flow and pressure sensors. Genyo enables automatic control of pump start-up and shutdown based on actual water demand, preventing any pressure fluctuations at delivery points with constant operating point. Genyo integrates multiple system controls into a single device.
- Delivery: up to 10 m³/h
- Power supply: both single and three-phase 50 and 60 Hz
- Power: up to 2.20 kW
- Maximum operating pressure: 10 bar
- Temperature of pumped liquid: to 60 °C
Applications:
- Domestic pressure boosting (single and multi-family dwellings).
- Small irrigation and gardening.
- Civil water systems (bathing establishments, campgrounds, sporting facilities).
Benefits:
- Protection against dry running integrated into the device.
- No maintenance required (a convenient alternative to traditional diaphragm surge tanks).
- Quick and easy installation.
- Compact size.
- Stable pressure without fluctuations at constant operating point.
- Back-up tank to compensate for small leaks or drips in the hydraulic system (patented system).
- Limited flow resistance.
Additional information
| Weight | 15 kg |
|---|---|
| Capacity Ltr | N/A |
| Length | |
| Diameter inch/cm | .55KW |
| Outlet | 1" |
| Flow Rate | 1" |
| Max Operating Temperature | 40 |
| Max Pumping Height | 40M |
| Weight (KG) | 10 |
Delivery:
Delivery is calculated at the checkout when the destination has been entered. We currently ship to Ireland, for other destinations please send us an email to discuss delivery.
Returns: How to return an item:
Put your unused item for return back in its original packaging. Send an email to info@waterpartsdirect.com and clearly state whether you are returning or exchanging your purchase and the reason why. Send the item back to the address below. We will be in touch if there are any issues or when your return has been processed.
Water Parts Direct, Rathnure Lower, Enniscorthy, Co. Wexford, Y21DX88
Mobile: +353 872592580
Email: info@waterpartsdirect.com
Returns Policy
At WaterPartsDirect we pride ourselves with the high-quality of the products we supply our customers and we always go out of our way to make sure that we provide you with only the best, regardless of your business or industry. We do of course understand that not every product is made equal and that sometimes there are cases where the product itself is not fit for purpose or simply do not suit for the reason that it was bought for. It is for this reason we are happy to accept items returned to us with 28 days of purchase and in this case we offer you an exchange or a full refund to your credit or debit card once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of WaterPartsDirect and may be refunded as a credit against a future purchase. All items must be returned to WaterPartsDirect in the same condition in which they were shipped and in a saleable condition. WaterPartsDirect reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.
Delivery is calculated at the checkout when the destination has been entered. We currently ship to Ireland, for other destinations please send us an email to discuss delivery.
Returns: How to return an item:
Put your unused item for return back in its original packaging. Send an email to info@waterpartsdirect.com and clearly state whether you are returning or exchanging your purchase and the reason why. Send the item back to the address below. We will be in touch if there are any issues or when your return has been processed.
Water Parts Direct, Rathnure Lower, Enniscorthy, Co. Wexford, Y21DX88
Mobile: +353 872592580
Email: info@waterpartsdirect.com
Returns Policy
At WaterPartsDirect we pride ourselves with the high-quality of the products we supply our customers and we always go out of our way to make sure that we provide you with only the best, regardless of your business or industry. We do of course understand that not every product is made equal and that sometimes there are cases where the product itself is not fit for purpose or simply do not suit for the reason that it was bought for. It is for this reason we are happy to accept items returned to us with 28 days of purchase and in this case we offer you an exchange or a full refund to your credit or debit card once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of WaterPartsDirect and may be refunded as a credit against a future purchase. All items must be returned to WaterPartsDirect in the same condition in which they were shipped and in a saleable condition. WaterPartsDirect reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.
Product brand
Related Products
High efficiency pumps with ECM-technology and permanent magnet rotor. The ecocirc can be operated either on automatically adjusted speed or on manual set speed, which makes it suitable for applications like radiant heating (one- and two pipe systems), underfloor and surface heating, boiler feed, solar stations and similar applications.The impressively simple shaftless spherical motor design has only one single self-aligning bearing and no shaft, which significantly reduces the number of costly and complicated parts. And of course ecocirc BASIC delivers high efficiency, the EEI value exceed the ErP 2015 level already today.The ecocirc is a truly reliable circulator featuring Anti-Block technology, dry-run protection and inrush current limitation. The Anti-Block technology efficiently prevents magnetite to enter the rotor chamber thus prevents blockage even in old systems. The dry-run protection and the inrush current limitation protect the motor from being overheated if dry running and damaged by high inrush currents.
€307.00 (incl VAT@23%) Add to cart
The Stairs 4" ST and Franklin Motor are a very successful pump and motor combination. The Stairs 4" ST series of pumps are manufactured using high quality materials and are designed to deliver years of dependable service. Pumps are on the floating impeller design which reduces starting torque requirements and reduces the effects of sand in the water. This combined with the Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. Theses motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. The motor is connected to only one capacitor which works permanently as start and run capacitor which comes as standard with these sets.Applications
Residential potable water supply from deep wells
Municipal and industrial waters supply
Irrigation and other agricultural applications
Fire fighting systems
Pressure boosting in high-rise buildings and other applications
€510.00 (incl VAT@23%) Add to cart
The HQ series pumps are designed for water supply and pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists. It is suitable for boosting pressure from underground or surface water supplies.
These pumps are widely used in domestic
applications such as the distribution of water in combination
with small and medium sized pressure sets, and for the irrigation
of gardens and allotments, etc.
€538.00 (incl VAT@23%) Add to cart
DOC pumps are versatile, corrosion-resistant and compact. Three basic versions are available with 0.3 to 0.7 kW power.
A DOC 7VX version with Vortex impeller and the DOC GT with fixed vertical float switch system are also available.Specifications
Delivery: up to 14 m_/h
Head: up to 11 m
Power supply: both single and three-phase 50 and 60 Hz
Power: from 0.25 kW up to 0.55 kW
Temperature of pumped liquid: to 40 ¡C
Maximum immersion depth: 5 m
Free passage: up to 20 mm
€595.00 (incl VAT@23%) Add to cart
Pedrollo CPm 210C Agricultural Washdown Pump c/w 20ltr horizontal sphere & automatic pressure switch
These pumps are top of the range when it comes to wash pumps and are supplied fully automated. It is designed to make short work of the all wash jobs around the farm.
€1,097.00 (incl VAT@23%) Add to cart
These pumps are widely used in domestic
applications such as the distribution of water in combination
with small and medium sized pressure sets, and for the irrigation
of gardens and allotments, etc.
€625.00 (incl VAT@23%) Add to cart
The Stairs 4" ST and Franklin Motor are a very successful pump and motor combination. The Stairs 4" ST series of pumps are manufactured using high quality materials and are designed to deliver years of dependable service. Pumps are on the floating impeller design which reduces starting torque requirements and reduces the effects of sand in the water. This combined with the Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. Theses motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. The motor is connected to only one capacitor which works permanently as start and run capacitor which comes as standard with these sets.Applications
Residential potable water supply from deep wells
Municipal and industrial waters supply
Irrigation and other agricultural applications
Fire fighting systems
Pressure boosting in high-rise buildings and other applications
€583.00 (incl VAT@23%) Add to cart
High efficiency pumps with ECM-technology and permanent magnet rotor. The ecocirc can be operated either on automatically adjusted speed or on manual set speed, which makes it suitable for applications like radiant heating (one- and two pipe systems), underfloor and surface heating, boiler feed, solar stations and similar applications.The impressively simple shaftless spherical motor design has only one single self-aligning bearing and no shaft, which significantly reduces the number of costly and complicated parts. And of course ecocirc BASIC delivers high efficiency, the EEI value exceed the ErP 2015 level already today.The ecocirc is a truly reliable circulator featuring Anti-Block technology, dry-run protection and inrush current limitation. The Anti-Block technology efficiently prevents magnetite to enter the rotor chamber thus prevents blockage even in old systems. The dry-run protection and the inrush current limitation protect the motor from being overheated if dry running and damaged by high inrush currents.
€115.50 (incl VAT@23%) Read more
Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. This motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ¼C storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. Capacitor and motor overload protection have to be provided by the customer. The motor is connected to only one capacitor which works permanently as start and run capacitor.
€393.00 – €1,173.00 (incl VAT@23%) Select options| Power | 0.37kW (0.5HP) | 0.55kW (0.75HP) | 0.75kW (1HP) | 1.1kW (1.5HP) | 1.5kW (2HP) | 2.2kW (3HP) | 3.7kW (5HP) | ||
|---|---|---|---|---|---|---|---|---|---|
| Weight (KG) | 8kg | 10kg | 11kg | 14kg | 15kg | 20kg | 32kg | ||
| Length | 40cm | 53cm | 53cm | 53cm | 80cm | 80cm | 80cm | ||
| Max Operating Temperature | 30°C | 30°C | 30°C | 30°C | 30°C | 30°C | 30°C |
The Stairs 4" ST and Franklin Motor are a very successful pump and motor combination. The Stairs 4" ST series of pumps are manufactured using high quality materials and are designed to deliver years of dependable service. Pumps are on the floating impeller design which reduces starting torque requirements and reduces the effects of sand in the water. This combined with the Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. Theses motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. The motor is connected to only one capacitor which works permanently as start and run capacitor which comes as standard with these sets.Applications
Residential potable water supply from deep wells
Municipal and industrial waters supply
Irrigation and other agricultural applications
Fire fighting systems
Pressure boosting in high-rise buildings and other applications
€895.00 (incl VAT@23%) Add to cart
These pumps are top of the range when it comes to wash pumps and are supplied fully automated. It is designed to make short work of the all wash jobs around the farm.
€690.00 (incl VAT@23%) Add to cart
The Stairs 4" ST and Franklin Motor are a very successful pump and motor combination. The Stairs 4" ST series of pumps are manufactured using high quality materials and are designed to deliver years of dependable service. Pumps are on the floating impeller design which reduces starting torque requirements and reduces the effects of sand in the water. This combined with the Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. Theses motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. The motor is connected to only one capacitor which works permanently as start and run capacitor which comes as standard with these sets.Applications
Residential potable water supply from deep wells
Municipal and industrial waters supply
Irrigation and other agricultural applications
Fire fighting systems
Pressure boosting in high-rise buildings and other applications
€711.00 (incl VAT@23%) Add to cart
The Stairs 4" ST and Franklin Motor are a very successful pump and motor combination. The Stairs 4" ST series of pumps are manufactured using high quality materials and are designed to deliver years of dependable service. Pumps are on the floating impeller design which reduces starting torque requirements and reduces the effects of sand in the water. This combined with the Franklin Electric 4-inch Submersible Encapsulated Motors, manufactured in ISO 9001 certified facilities. Theses motors are built for operation in 4-inch diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The PSC motor is a single phase motor for operation with run capacitor. The motor is connected to only one capacitor which works permanently as start and run capacitor which comes as standard with these sets.Applications
Residential potable water supply from deep wells
Municipal and industrial waters supply
Irrigation and other agricultural applications
Fire fighting systems
Pressure boosting in high-rise buildings and other applications
€692.00 (incl VAT@23%) Add to cart
The HQ series pumps are designed for water supply and pressure boosting in residential, commercial and light industrial applications where low or inadequate water pressure exists. It is suitable for boosting pressure from underground or surface water supplies.
€560.00 (incl VAT@23%) Add to cart