€213.00 (Excl. VAT@23%)
Email to a friendDescription
The PRESFLO pressure sensing pump controller automatically starts and stops the pump.
It is a substitute for traditional pressure switch/surge tank systems while offering important advantages
KEY FEATURES
– Water Accumulator – Built-in
– Non-Return Valve – Built in
– 3 Pieces Union – Integrated
– IP65 – Enclosure
– Resin Protected PCB Electronic Board
– Free Positioning – Vertical, Horizontal or any angle
– Excessively Frequent Starts – Protection with auto reset
– Dry Run – Protection with auto reset
– 3 ltr tank
3 Pieces Union – integrated – Avoiding the need of expensive 3 pieces unions
Non-Return Valve – built-in with easy inspection – Avoid the need to install one
Pressure Gauge – easy-to-add – Optional: it can be added anytime
3 litre Diaphragm Water Tank – Preloaded at 1.5 bar.
Adjustable Start Pressure – Easily and intuitively by turning a screw using the supplied screw driver
Pressure activated pump controller for fully automatic operation of water supply pumps. Includes dry run protection. Maximum load 10 amps. Suitable for water up to 65° celcius.
PRESFLO MULTI – Electronic pressure-flow sensing pump controller equipped with 3 litre surge tank
– Digitally selectable pump start pressure: 1-5 bars.
– 3 litre surge tank.
– Dry running protection with automatic re-set.
– Digital display.
– Excessively frequent starting protection.
– Built in check valve
– Cut-off flow rate as low as : 2.5 lt/min
– Resin bonded electronic
– Nominal max current 10A & 16A (1HP & 2HP).
Voltage : available in 230V (or 110V only on special order)
Connections : available in BSP
Display : Bar or PSI
TECHNICAL DETAILS:
Max Pump Power: 1.5Kw / 2.0Hp
Start Pressure: 1.0 – 5.0 bar
Max Current: 16A
Water Storage: 3 ltrs tank
Protections: Dry Run / Frequent Starts / Over Current
Voltage: 230V
Frequency: 50/60Hz
Connections: 1″ BSP
Cut Off Flow Rate: 2 l/min
IP Protection: IP65
Additional information
Weight | 5 kg |
---|---|
Inlet | 1" |
Outlet | 1" |
Flow Rate | 10m/3 p/hr |
Weight (KG) | 5KG |
Delivery is calculated at the checkout when the destination has been entered. We currently ship to Ireland, for other destinations please send us an email to discuss delivery.
Returns: How to return an item:
Put your unused item for return back in its original packaging. Send an email to info@waterpartsdirect.com and clearly state whether you are returning or exchanging your purchase and the reason why. Send the item back to the address below. We will be in touch if there are any issues or when your return has been processed.
Water Parts Direct, Rathnure Lower, Enniscorthy, Co. Wexford, Y21DX88
Mobile: +353 872592580
Email: info@waterpartsdirect.com
Returns Policy
At WaterPartsDirect we pride ourselves with the high-quality of the products we supply our customers and we always go out of our way to make sure that we provide you with only the best, regardless of your business or industry. We do of course understand that not every product is made equal and that sometimes there are cases where the product itself is not fit for purpose or simply do not suit for the reason that it was bought for. It is for this reason we are happy to accept items returned to us with 28 days of purchase and in this case we offer you an exchange or a full refund to your credit or debit card once we receive the items and process them in our warehouse. Any returns which fall outside this 28 day time period may be considered on a case-by-case basis and is at the discretion of WaterPartsDirect and may be refunded as a credit against a future purchase. All items must be returned to WaterPartsDirect in the same condition in which they were shipped and in a saleable condition. WaterPartsDirect reserves the right to refuse a return if it is determined that the item has been used or worn and then returned for any reason other than being ‘faulty’.